UK diy secondary double glazing, sound insulation and noise reduction

Secondary Glazing UK

Email: 2008@protechdirect.co.uk

Secondary Double Glazing Surveying Instructions

Page Contents:
- Single and hinged units
- 2 Panel Horizontal Slider
- 3 Panel Horizontal Slider
- 4 Panel Horizontal Slider
- Vertical Sliding Units
- Getting A Quote

Important Note:

These instructions are for general guidance only and you should satisfy yourself that they will apply to your situation.

***Please Read***

Within a very short period you will receive your invoice, this also doubles as confirmation of your order.

Having received your invoice you must inform us of any errors within 48hrs.

When placing your order/quote we highly recommend that you use the formulas laid out on this web page. Failiure to use these formulae can lead to mis-interpretation of your requirements and we will not be responsible for any problems that may arise as a result of not following our guidelines.

NOTE:
We recommend you allow 10mm clearance to allow for out of square reveals for ease of installation, manufacturing and measuring tolerences. You may wish to allow less than 10mm but this may mean you will require a plane or sharp chisel. If in any doubt please ask, we are here to help.

If your windows are less than 800mm from the internal floor or within 300mm of a door you will need toughened or laminated safety glass at extra cost, this is to comply with Building Regulations and is vitally important, if in doubt please ask, as we are here to help you.

We offer full and unlimited telephone support starting with the measuring procedure and including help during the actual installation.
During the measuring process we can offer assistance usually aided with digital images and/or sketches provided by yourself

Single Lift Out Hinged Units

Single Lift Out
Panel lifts up and out for removal

Hinged unit left
Left Hung Opening In

Hinged unit Right
Right Hung Opening In

1.		Take the overall size from wall B to wall C and minus 10mm, i.e. 600mm becomes 590mm
2.		Measure from wall A to wall C and minus 10mm

When ordering, make sure you quote either:
LO - HUL - HUR

2 Panel Horizontal Slider

1.		Take the overall size from wall B to wall D and minus 10mm, i.e. 1780mm becomes 1770mm
2.		Measure from the wall to the centre of C and minus 5mm i.e. 785 becomes 780mm
3.		Measure from wall A to wall D and minus 10mm

When ordering,
make sure you quote either:
SS2RH - SS2LH

3 Panel Horizontal Slider

When ordering, make sure you quote either:
CO3LH - CO3RH - SS3

1.		Take the overall size from wall B to wall E and minus 10mm, i.e. 1780mm becomes 1770mm
2.		Measure from the wall to the centre of C and minus 5mm i.e. 785 becomes 780mm
3.		Measure from C to D - centre to centre to line up all mullions
4.		Measure from wall A to wall E and minus 10mm

4 Panel Horizontal Slider

1.		Take the overall size from wall B to wall F and minus 10mm, i.e. 1780mm becomes 1770mm
2.		Measure from wall B to the centre of C and minus 5mm i.e 785mm becomes 780mm
3.		Measure from C to D - (Centre to centre to line up all mullions)
4.		Measure from Dto E- (Centre to centre to line up all mullions)
5.		Measure from wall A to wall F and minus 10mm

5 Panel Horizontal Slider

1.		Take the overall size from wall B to wall G and minus 10mm, i.e. 1780mm becomes 1770mm
2.		Measure from wall B to the centre of C and minus 5mm i.e 785mm becomes 780mm
3.		Measure from C to D - (Centre to centre to line up all mullions)
4.		Measure from Dto E- (Centre to centre to line up all mullions)
5.		Measure from E to F- (Centre to centre to line up all mullions)
6.		Measure from wall A to wall G and minus 10mm

Vertical Slider

Balanced Vertical Slider
With Spring Balances

1.		Measure from wall D to wall C and minus 10mm
2.		Measure from wall A to wall C and minus 10mm
3.		Measure from wall A to the centre of B and minus 5mm

When ordering, make sure you quote either:
VS - BVS

How do I get a Quotation for Secondary Double Glazing?

In order to obtain a quotation for secondary glazing you need to either email or fax us with - widths x heights x style (e.g. two panel vertical slider, three panel horizontal slider, hinged unit etc) as per the measuring instructions below

You would be well advised to have a good look at the secondary glazing options available and which of those suits your requirements for the final operation of the products.

E-mail - 2008@protechdirect.co.uk